Understanding Your Home’s Circuit Breaker
A breaker is basically a safety and security mechanism used to safeguard your home or office versus circuit overloads or short circuits. This is managed by cutting off the flow of electricity in your circuit each time current rises above the safe quantity.
At which point, your office or home will experience a power outage with no appliances connected to their circuit getting any electric energy. After this you will be called for to restart the circuit to get electrical energy moving once again.
Depending on the causes behind the circuit breaker trip, you may or may not need to engage emergency electrician Singapore services. In particular, should you find any burnt marks or smoke emerging from your power sockets, you should immediately contact your electrician.
Electromagnet Based Circuit Breakers
Electromagnet based circuit breakers are the most commonly used form of circuit breakers in the modern home. Basically a switch of sorts, this type of circuit breaker contains a hot wire which is linked to both ends of the switch and to an electromagnet. When in “on” position, the circuit breaker enables electrical energy to move via the circuit.
Nevertheless, when the current in the circuit leaps to harmful amounts, the electricity will adequately magnetize the electromagnet. Whereupon, the electromagnet will be powerful enough to lower the switch, and eliminating its link with the circuit. When this is done, the circuit is broken, and no electrical energy and travel through it.
Since it is a switch, this type of circuit breaker can be used repeatedly but does suffer from wear and tear each time. This means that regular inspection and evaluation is needed to ensure that it is still in good enough a condition to do its job.
Why Does Your Circuit Breaker Keep Tripping?
Faulty or Damaged Appliances
Malfunctioning electric home appliances tend to require more electrical energy to function. Therefore, their procedure might trigger a rise of charge all over the whole circuit. When this occurs, your breaker trips in order to stop any other part of the circuit from overheating.
Faulty appliances likewise present the risk of burning or blowing up up. Therefore, if you identify a trend of appliance usage that causes the breaker to trip, we advise carrying out a complete assessment of its condition.
Making Use of way too many Appliances
Making use of way too many high power consuming devices can additionally cause a surge in electric energy in your circuit. This is particularly so if you utilize a multi-plug from a single power socket. In this arrangement, current increases quickly and thus causes your breaker to trip.
When and limiting the number of devices linked to a multi-plug, we suggest preventing turning on too many powerful appliances at.